3D Drucker Teile MKS Gen V1.3 Motherboard 3D Drucker Steuerkarte Mit USB Mega 2560 Rampen 1,4 Motherboard mit Stromkabel Description
Features:The 2560 and Ramps 1.4 are assembled on one board, which solves the problem that the Ramps 1.4 combination interface is cumbersome and easy to malfunction.Replaceable motor drive, support 4988 drive and 8825 drive, TMC2100 drive.The board uses a high-quality 4-layer board and is specifically optimized for heat dissipation; the ramps are 2-layer boards.High quality MOSFET is used for better heat dissipation.The special power chip is used to support the 12V-24V power input to solve the heating problem of the Ramps voltage conversion chip.Description:Can accept 24V input, the same system power can reduce the hot bed current to 1/4, effectively solve the hot bed MOS tube heating problem.The firmware can use the open source firmware Marlin, the configuration is exactly the same as Ramps 1.4, which can directly replace Ramps 1.4.It can be directly connected to Ramps1.4, 2004LCD control board and 12864LCD control board.The motor pulse and direction output port are reserved, which is convenient for external high current to be connected to a large current (such as 2A, 5A) motor drive circuit.The Servos, AUX-1, and AUX-2 interfaces on the Ramps 1.4 are reserved, and three 5V outputs and three 12V output interfaces are provided.Specifications:Model: MKS Gen V1.3 2560Material: Plastic, MetalColor: black & greenSize: 180*130*30mmPackage included:1 x Motherboard1 x USB CableNote:1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!2. Please allow 1-3cm measuring deviation due to manual measurement.